PCE-Polycarboxylate Superplasticizer Powder

PCE-Polycarboxylate Superplasticizer Powder for concrete Model PC3050

PCE-Polycarboxylate Superplasticizer Powder for concrete Model PC3050

PC 3050  is a kind of polycarboxylate superplasticizer powder with higher water reducing rate and high  collapse resistance.

In addition to the inherent characteristics of the powder water reducer, the biggest advantage is that it has very good collapse retention. It can be directly dissolved in water to prepare a liquid water reducing agent, and all indicators can reach the performance of a liquid polycarboxylic acid water reducing pumping agent, which makes the application process greatly convenient. For use in remote areas, simply stir and evenly dissolve it. The product has the characteristics of uniform particles, low water content, good solubility, high water reduction, and high collapse retention. 


Appearance  Buff or offwhite powder
Moisture content≤2%
Active Content≥86%
Mesh 50≥85%
Bulk density450-700 g/l
Alkali content≤5%
pH value(20°C, 20% liquid)9.0±1.0
Air content≤2.7%
Chang in slump within 1 hour/mm≤80mm
Water reducing rate≥25%

Application Range

High Requirment Concrete

High Requirment Concrete

Key Properties

-The water reducing rate is more then 25% , can greatly improve the fluidity of the concrete with the same amount of water added.   

- In the spray drying process of traditional 

Polycarboxylate powder water reducing agent, due to the effect of high temperature, the polycarboxylic acid group will more or less cause certain damage. Thereby greatly reducing the performance of the pagoda after the liquid is converted into a solid. PC-3050 is manufactured by a special process, so that the carboxylic acid group is not destroyed during the powder manufacturing process, so that the original liquid mother liquor is retained.  

-Good solubility and fast dissolution rate

Especially the particles are uniform and the specific surface area is large. So it can dissolve quickly in the process of dissolving in water. And there is no obvious impurities after dissolution. 


After being configured as a liquid, this product is suitable for the use of liquid polycarboxylic acid water-reducing agents, and is suitable for pre-mixed and cast-in-situ concrete in various industrial and civil buildings. It is also used in high-strength, high-performance, high-durability, super-fluid, vibration-free, self-leveling, self-compacting and steel fiber special concrete; precast concrete, concrete for long-distance transportation, commercial concrete, etc.

It is especially suitable for construction sites in remote areas that are not suitable for building factories, and only simple pre-mixing equipment can meet the construction requirements.

Packaging and Storage

A. Standard Packing: In 25kg bags out HDPE bags inner with LDPE bags

B. Big Bag or other special packages are possible on request.

Store it in a cool, dry place below 30°C and protected against humidity and pressing. Storage time should not exceed 12 months. And please use it up within 60days if the bags are open.

Safety Notes

The above data is in accordance with our knowledge, but don’t absolve the clients carefully checking it all immediately on receipt. To avoid the different formulation and different raw materials, please do more testing before using it. We reserve the right to alter our product and without informing in advance.

E-mail: sdcharing@sdcharing.com

Phone: +86 131 7667 0070

WhatsApp: 8613176670070

Add.: Jinan City, Shandong Province, China

Copyright © Shandong Charing Industry Co., Ltd. All Rights Reserved | Sitemap | Technical Support: Reanod