- Home
- Products +
- Industries +
- About Us +
- News
- Contact Us
- Home
- Products
- Industries
- About Us
- News
- Contact Us
Oct. 09, 2026
Polycarboxylate Superplasticizer (PCE) in Dry-Mix Mortar: Powder for Grouts, Self-Leveling and Tile Adhesive Dry-mix mortar carries no water, so its water reducer must be a powder. PC 3010 is spray-dried and heat-stable, the standard for grouts, self-leveling compounds and tile adhesive. PC 2018 is flake-milled with a heat-protection agent (91% active, ≥25% water reduction) for hot regions. PC 6010P softens at 50 °C and suits concrete, not mortar.
Oct. 08, 2026
Which Polycarboxylate Superplasticizer (PCE) Should You Choose? PC 6010, PC 6030E and PC 6020RT Explained Pick a PCE in two steps: performance, then form. PC 6010 for ordinary concrete (≥25% water reduction), PC 6030E for early strength (1-day ≥180%), PC 6020RT for slump retention ≥90 min. Then F flake to save cost or P powder to dissolve fast.
Oct. 02, 2026
Air Content in Concrete: Why Polycarboxylate Superplasticizer (PCE) Entrains Air and How to Control It Every extra 1% of air cuts concrete strength by about 5%, and polycarboxylate superplasticizer (PCE) entrains air on its own. Target 2%-4% for ordinary concrete, 4%-7% for freeze-thaw exposure, ≤2% for high strength. Measure air in the trial mix, then correct: defoamer at 0.01%-0.05% to remove air, air-entraining agent at 0.005%-0.05% to add it.
Oct. 01, 2026
How to Judge the Quality of a Polycarboxylate Superplasticizer (PCE) Water reduction rate alone cannot judge a polycarboxylate superplasticizer (PCE) - molecular structure can. Four parameters decide quality: Mw 20,000-60,000 g/mol, PDI consistent batch to batch, side chains 20-70 EO units, acid-to-ether ratio 2:1-6:1 for reduction versus retention. Batch consistency is the real test; ask for the numbers.
Sep. 30, 2026
What Is a High Slump-Retention Polycarboxylate Superplasticizer (PCE)? PC 6020RT Explained High slump-retention PCE keeps concrete workable for hours without retarding the set. Ester groups hydrolyse slowly in alkaline concrete, replenishing dispersion: retention without retardation. CHARING PC 6020RT holds slump ≥90 min; blend with PC 6010 (8:1-5:1) for long hauls, hot weather, pumping, large pours. Watch air; add defoamer if it rises
Sep. 29, 2026
Early-Strength Polycarboxylate Superplasticizer (PCE): What It Is and When to Use It Need to demould today or reopen a road tonight? CHARING PC 6030E early-strength PCE gives ≥180% of standard PCE strength at 1 day and ≥170% at 3 days, with ≥25% water reduction and chloride ≤0.06%. Built for precast, cold weather and emergency repair. Dosage 0.2%-0.5%; never blend with naphthalene reducers.
E-mail: sdcharing@sdcharing.com
Phone: +86 131 7667 0070
WhatsApp: +8615066133527
Add.: No.605-606,NO1 BUILDING,WANGYUE ZHIGU INDUSTRY PARK,NO.1919 WANGYUE ROAD, SHIZHONG AREA,JINAN CITY, SHANDONG PROVINCE,CHINA
